| PRODUCT RANGE |
| Stainless Steel Wires are used in Engineering, Chemical, Construction and many other industries besides in various applications such as manufacturing of KITCHEN WARE, ORNAMENTS, UTENSILS, Stainless Steel Wires at SKM are manufactured as per INTERNATIONAL STANDARDS, as per customers’ specifications. |
| SPECIAL CHARACTERISTICS |
- Produced from Wire Rods meeting International standards
- Supplied in annealed, 1/8 hard, ¼ hard and 1/2hard, ¾ hard, full hard conditions
- Drawn to very close tolerance limit
- Excellent Surface finish
|
|
| |
| MECHANICAL PROPERTIES |
| |
| Dia(mm) |
AISI 304, 316 |
AISI 304L, 316L |
| |
Tensile Strength
N/mm2 (kgf/mm2) |
Elongation (%) |
Tensile Strength
N/mm2 (kgf/mm2) |
Elongation (%) |
| 0.10-0.16 |
Manufactured
In only Low
Carbon grades |
30 min |
785 max (80 max) |
30 min |
| 0.17-0.22 |
30 min |
765 max (78 max) |
30 min |
| 0.23-0.40 |
30 min |
745 max (76 max) |
30 min |
| 0.41-0.70 |
833 max (85 max) |
40 min |
745 max (76 max) |
40 min |
| 0.71-1.60 |
800 max (82 max) |
40 min |
715 max (73 max) |
40 min |
| 1.61-8.00 |
785 max (80 max) |
40 min |
685 max (70 max) |
40 min |
|
| |
DIAMETER TOLERANCES
|
| |
| Dia (mm) |
Tolerance (mm) |
Ovality (mm) |
| 0.10-0.11 |
+/-0.003 |
0.003 |
| 0.12-0.16 |
+/-0.005 |
0.005 |
| 0.17-0.28 |
+/-0.007 |
0.007 |
| 0.29-0.50 |
+/-0.008 |
0.008 |
| 0.51-0.90 |
+/-0.013 |
0.013 |
| 0.91-1.60 |
+/-0.020 |
0.020 |
| 1.61-2.80 |
+/-0.030 |
0.030 |
| 2.81-6.00 |
+/-0.030 |
0.030 |
| 6.00-8.00 |
+/-0.040 |
0.040 |
|
Packing specifications on Plastic Spools as per DIN Standards
|
| |
| WIRE (EPQ) FOR KITCHEN WARE AND BASKETS |
| SKM is specialized in manufacturing Stainless Steel Wires in bright as well as in matte finish, suitable for kitchenware and baskets. Grade AISI 304 in various sizes. SKM is a major market player for wires in Electro-polish quality used in Balls, Pins, Nails and for other general applications. |
| WIRES FOR SCRUBBERS |
| SKM Stainless Steel Wires for Scrubbers have a very bright smooth finish and its extra softness enables further cold working by the scrubber manufacturers. |
|
| |
| SPECIFICATIONS FOR SCRUBBER APPLICATIONS IN SPOOL PACKING |
| |
| Diameter(mm) |
Type of spool |
Unit Weight(kg) |
| 0.80 |
DIN 355, DIN 250 |
40-45, 18-22 |
| 0.12 TO 0.15 |
DIN 160, DIN 125 |
3-6,1.5-3 |
| 0.15 |
DIN 200 |
8-12 |
|
| |
| MECHANICAL PROPERTIES |
| |
| Diameter (mm) |
Grade |
Tensile Strength
N/mm2(kgf/mm2) |
Finish Method |
| 0.8 |
AISI 304 |
640-830(65-85) |
Annealed |
AISI 430
AISI 434 |
490-640(50-65) |
| 0.12 TO 0.15 |
AISI 304 |
Max.785(Max 80) |
Annealed |
| 0.12 to 0.15 |
AISI 430
AISI 434 |
Min 1170 (Min120) |
Wet drawn |
|
| |
| Stainless Steel Wires for Wall Tie/ Tying Wires/ Reinforcement Bar |
| SKM's Stainless Steel Wire find excellent applications in the Construstion Industry.SKM manufactures Stainless Steel
Wire in grades of 302, 304, 316, 316Ti, in bright as well as annealed conditions. Perfect for manufacture of Wall Tie, Tying
Wires as well as Reinforcement Bars for building and construstion. The sizes offered are 0.9 mm to 8.0 mm. |
|
| |
| SPECIFICATIONS FOR SOFT ANNEALED WIRES IN COILS |
| |
| Wire Dia Range |
Coil Diameter in inches |
Coil Wt.(Kgs.) |
Surface finish |
Total Ht Formers + Pallets Inches |
Total Wt. on Formers Kg. |
|
ID |
OD |
Min |
Max |
|
|
|
| 5.00-8.00 |
24-27 |
33-37 |
100 |
500 |
MATTE |
60 |
1500 |
| 5.50-2.50 |
18-22 |
25-30 |
100 |
500 |
MATTE |
60 |
1000 |
| 2.49-1.60 |
18-22 |
25-30 |
100 |
500 |
MATTE |
60 |
1000 |
| 1.59-1.00 |
12-14 |
20-24 |
50 |
100 |
MATTE |
60 |
500 |
|
| |
| MECHANICAL PROPERTIES ALONG WITH PACKING DETAILS SPECIFICATION FOR 1/8,1/4,1/2,3/4 HARD TEMPER WIRES |
| |
| Temper |
Wire dia range |
Coil dia range
(inches) |
Coil Weight |
Surface Finish |
Total Wt. On Formers |
|
mm |
ID |
OD |
Kg |
|
Kg. |
| 1/8 hard,120 KSIMax |
5.00-8.00 |
24-27 |
33-37 |
250-400 |
Bright/Matte |
1500 |
| 4.50-6.00 |
18-22 |
25-30 |
100-150 |
Stearate coated |
1000 |
| 4.50-6.00 |
18-22 |
25-30 |
100-150 |
Matte (clean) |
1000 |
| 4.50-6.00 |
18-22 |
25-30 |
100-150 |
Bright |
1000 |
| 2.00-4.50 |
18-22 |
25-30 |
100-1000 |
Stearate coated |
1000 |
| 2.00-4.50 |
18-22 |
25-30 |
100-1000 |
Matte (clean) |
1000 |
| 2.00-4.50 |
18-22 |
25-30 |
100-1000 |
Bright |
1000 |
| 1.25-2.00 |
18-22 |
25-30 |
50-150 |
Stearate coated |
1000 |
| 1.25-2.00 |
18-22 |
25-30 |
50-150 |
Matte (clean) |
1000 |
| 1.25-2.00 |
18-22 |
25-30 |
50-150 |
Bright |
1000 |
| 0.90-1.25 |
10-12 |
19-21 |
25-90 |
Stearate coated |
500 |
| 0.90-1.25 |
10-12 |
19-21 |
25-90 |
Matte (clean) |
500 |
| 1/4 hard,128 KSIMax. |
0.90-1.25 |
10-12 |
19-21 |
25-90 |
Bright |
500 |
| 4.50-6.00 |
18-22 |
25-30 |
100-150 |
Stearate coated |
1000 |
| 4.50-6.00 |
18-22 |
25-30 |
100-150 |
Matte (clean) |
1000 |
| 4.50-6.00 |
18-22 |
25-30 |
100-150 |
Bright |
1000 |
| 2.00-4.50 |
18-22 |
25-30 |
100-1000 |
Stearate coated |
1000 |
| 2.00-4.50 |
18-22 |
25-30 |
100-1000 |
Matte (clean) |
1000 |
| 2.00-4.50 |
18-22 |
25-30 |
100-1000 |
Bright |
1000 |
| 1.25-2.00 |
18-22 |
25-30 |
50-150 |
Stearate coated |
1000 |
| 1.25-2.00 |
18-22 |
25-30 |
50-150 |
Matte (clean) |
1000 |
| 1.25-2.00 |
18-22 |
25-30 |
50-150 |
Bright |
1000 |
| 0.90-1.25 |
10-12 |
19-21 |
25-90 |
Stearate coated |
500 |
| 0.90-1.25 |
10-12 |
19-21 |
25-90 |
Matte (clean) |
500 |
| 0.90-1.25 |
10-12 |
19-21 |
25-90 |
Bright |
500 |
|
| Note : Total height of former and pallet together is 1524mm Max. |
